Description
FBE (Outer Wall) (Standard ISO 21809-2:2014)
The product implements ISO 21809-2:2014 standard,which is a single layer of epoxy
heavy anti-corrosive powder coating with convenient construction, rapid curing and excellent performance. It is suitable for external anti-corrosion protection of steel pipes and components, the operating temperature is-30℃ ~80℃, and the environment is underground or underwater environment. The coating has high crosslinking density and strong adhesion, preventing the corrosion of soil, hydrocarbons, acid and alkali salts, microorganisms, waste water and seawater, and the coating has good coverage and anti-corrosion resistance on welds, edges and special-shaped workpieces.
1. Application scope and characteristics
●External corrosion prevention of steel pipes, pipe fittings, valves, pumps, containers, components, etc.
● Compared with other types of coatings, environmental protection, easy to thick coating, good adhesion, with excellent cathode stripping and anti-corrosion properties.
●It has the characteristics of mature process, wide application range, long anti-corrosion life, and wide operating temperature range (-30℃ ~80℃). The broken areas are easy to repair.
2. Method and dosage
1 .Coating method: Electrostatic spraying,thermal spraying, fluidized bed, well immersion coating, roll coating.
2 .Theoretical dosage: 150g/M2/100μm. Ordinary level, ≥300μm, Strengthen the level, ≥400μm.
3 .Surface treatment: Sandblasting or Pelblasting.
4 .Curing instructions: The powder coating is applied on the surface of 180~230℃ preheated workpiece, cured by waste heat, and generally does not need later heating. If the ambient temperature is very low or the heat capacity of the workpiece is insufficient, additional heating and curing is required.
3. Producing Department
4. Paking
Product Tags:
|
|
FBE (Outer Wall) Fusion-Bonded Epoxy Coating For containers, components Images
|
